Straight Arm Aerial Work Platform
GTBZ-type self-propelled straight-arm aerial working platform can stroll freely when working at heights, with massive working differences and immoderate efficiency. The hydraulic motor can collect 40% of the mountain climbing capacity through the planetary reducer. The telescopic extend and oil cylinder are furnished with a dust-proof sheath, which can efficiently cease dust from entering. The effortless shape structure makes it difficult for the extend and chassis to maintain sand and dust. The prolonged standpoint sensor can disclose the measurement and mindset of the increase in true time. The protection stage of the electrical laptop is above IP65. The horizontal extension operation vary of the computing system is large, and it can moreover constantly complete high-altitude operations inner a high-quality range. There are two and four-wheel drive, two and four-wheel instruction configurations. Especially fabulous for shipbuilding, ship repair, development construction, steel structure installation, bridge construction, etc.
Product Features:
(1) PLC and CAN bus control. One industrial controller is installed on the underframe, turntable and platform respectively. The protection grade of these controllers is IP65. At the same time, advanced CAN bus control is adopted, which has a simple circuits and good reliability; Simple maintenance and fault diagnosis.
(2) A patented weighing device. The patented weighing device of our company is used. The weighing device can accurately weigh the workload of the workbench and automatically divide it into various load levels. The maximum load can reach 480kg. The weighting device is not affected by the position of the load on the platform, and the normal operation of the platform is prevented from being affected by misjudgment.
Technical Parameters:
Model | GTBZ-23 | GTBZ-25 | GTBZ-27 |
Maximum working height(m) | 25 | 27.2 | 28.7 |
Maximum lifting height (m) | 23 | 25.2 | 26.7 |
Maximum horizontal working radius (m) | 20.8 | 21.9 | 23.4 |
Maximum bearing capacity(kg) | 480/260 | 480/260 | 480/330 |
Turning radius of inner wheel(m) | 3 | 3.59 | 3.59 |
Turning radius of the outer ship(m) | 5.2 | 5.95 | 6.25 |
Platform size (L x W x H)(m) | 1.83×0.76×1.13 | 1.83×0.76×1.13 | 2.44×0.91×1.13 |
Collection size (L x W x H)(m) | 11.08×2.49×2.7 | 11.36×2.79×2.8 | 8.66×2.49×2.83 |
Wheelbase (m) | 2.8 | 3 | 3 |
Max Climb Capability | 0.3 | 0.3 | 0.4 |
Turntable rotation angle (°) | 360 | 360 | 360 |
Rotary speed of turntable(rpm) | 0～1.0 | 0～1.0 | 0～1.0 |
Platform rotation angle (°) | 160 | 160 | 160 |
Number of boom sections(section) | 3 | 3 | 3 |
Boom luffing angle (°) | －10～＋75 | －12～＋75 | －12～＋75 |
Maximum hydraulic pressure(MPa) | 21 | 21 | 21 |
Maximum pressure of traveling system (MPa) | 25 | 25 | 25 |
Ground clearance (m) | 0.44 | 0.43 | 0.43 |
Fuel tank capacity (L) | 151 | 151 | 151 |
Driving speed (stowed)(km/h) | 6.3 | 5.3 | 5.3 |
Driving speed (lifting status)(km/h) | 1.1 | 1.1 | 1.1 |
System voltage (V) | 12 | 24 | 24 |
Rated power of engine (kw/rmp) | 56/2200 | 56/2200 | 60/2200 |
Drive wheel size | 45219 | 45280 | 45280 |
Drive steering type | 4×2×2 | 4×2×2 | 4×2×2 |
Operating Weight (kg) | 13540 | 15500 | 16140 |
Model | GTBZ-30 | GTBZ-32 | GTBZ-36 |
Maximum working height(m) | 32.5 | 34 | 38.7 |
Maximum lifting height (m) | 30.5 | 32 | 36.7 |
Maximum horizontal working radius (m) | 22.9 | 22.9 | 20.5 |
Maximum bearing capacity(kg) | 480/340 | 480/340 | 480/340 |
Turning radius of inner wheel(m) | 4.14 | 4.14 | 3.13 |
Turning radius of the outer ship(m) | 6.56 | 6.56 | 6.75 |
Platform size (L x W x H)(m) | 2.44×0.91×1.13 | 2.44×0.91×1.13 | 2.44×0.91×1.13 |
Collection size (L x W x H)(m) | 13×2.49×3.08 | 13×2.49×3.12 | 13×2.49×3.18 |
Wheelbase (m) | 3.66 | 3.66 | 3.9 |
Max Climb Capability | 0.4 | 0.4 | 0.4 |
Turntable rotation angle (°) | 360 | 360 | 360 |
Rotary speed of turntable(rpm) | 0～0.8 | 0～0.8 | 0～0.8 |
Platform rotation angle (°) | 160 | 160 | 160 |
Number of boom sections(section) | 3 | 3 | 3 |
Boom luffing angle (°) | －12～＋75 | －12～＋75 | －12～＋75 |
Maximum hydraulic pressure(MPa) | 21 | 21 | 21 |
Maximum pressure of traveling system (MPa) | 25 | 25 | 25 |
Ground clearance (m) | 0.43 | 0.43 | 0.43 |
Fuel tank capacity (L) | 151 | 151 | 151 |
Driving speed (stowed)(km/h) | 4.4 | 4.4 | 4.4 |
Driving speed (lifting status)(km/h) | 1.1 | 1.1 | 1.1 |
System voltage (V) | 24 | 24 | 24 |
Rated power of the engine (kw/rpm) | 60/2200 | 60/2200 | 60/2200 |
Drive wheel size | 45219 | 45280 | 45280 |
Drive steering type | 4×4×4 | 4×4×4 | 4×4×4 |
Operating Weight (kg) | 18500 | 18660 | 20000 |
Model | GTBZ-38 | GTBZ-42 | GTBZ-46 |
Maximum working height(m) | 40.4 | 44 | 48 |
Maximum lifting height (m) | 38.4 | 42 | 46 |
Maximum horizontal working radius (m) | 22.9 | 23 | 23.4 |
Maximum bearing capacity(kg) | 480/230 | 480/230 | 480/230 |
Turning radius of inner wheel(m) | 3.13 | 3.13 | 4.13 |
Turning radius of the outer ship(m) | 6.75 | 6.75 | 7.02 |
Platform size (L x W x H)(m) | 2.44×0.91×1.13 | 2.44×0.91×1.13 | 2.44×0.91×1.13 |
Collection size (L x W x H)(m) | 14.1×2.49×3.22 | 13.65×2.49×3.28 | 13.26×2.8×3.36 |
Wheelbase (m) | 3.9 | 3.9 | 4.2 |
Max Climb Capability | 0.4 | 0.4 | 0.3 |
Turntable rotation angle (°) | 360 | 360 | 360 |
Rotary speed of turntable(rpm) | 0～0.8 | 0～0.8 | 0～0.3 |
Platform rotation angle (°) | 160 | 160 | 160 |
Number of boom sections(section) | 4 | 4 | 4 |
Boom luffing angle (°) | －12～＋75 | －12～＋75 | －12～＋75 |
Maximum hydraulic pressure(MPa) | 21 | 21 | 21 |
Maximum pressure of traveling system (MPa) | 25 | 25 | 25 |
Ground clearance (m) | 0.43 | 0.43 | 0.43 |
Fuel tank capacity (L) | 151 | 151 | 151 |
Driving speed (stowed)(km/h） | 4.4 | 4.4 | 4.4 |
Driving speed (lifting status)(km/h) | 1.1 | 1.1 | 1.1 |
System voltage (V) | 24 | 24 | 24 |
Rated power of engine(kw/rpm) | 60/2200 | 60/2200 | 60/2200 |
Drive wheel size | 45280 | 45280 | 385x65-22.5 |
Drive steering type | 4×4×4 | 4×4×4 | 4×4×4 |
Operating Weight (kg) | 20900 | 21900 | 24900 |
| Model | GTBZ-23 | GTBZ-25 | GTBZ-27 |
| Maximum working height(m) | 25 | 27.2 | 28.7 |
| Maximum lifting height (m) | 23 | 25.2 | 26.7 |
| Maximum horizontal working radius (m) | 20.8 | 21.9 | 23.4 |
| Maximum bearing capacity(kg) | 480/260 | 480/260 | 480/330 |
| Turning radius of inner wheel(m) | 3 | 3.59 | 3.59 |
| Turning radius of outer ship(m) | 5.2 | 5.95 | 6.25 |
| Platform size (L x W x H)(m) | 1.83×0.76×1.13 | 1.83×0.76×1.13 | 2.44×0.91×1.13 |
| Collection size (L x W x H)(m) | 11.08×2.49×2.7 | 11.36×2.79×2.8 | 8.66×2.49×2.83 |
| Wheelbase (m) | 2.8 | 3 | 3 |
| Max Climb Capability | 0.3 | 0.3 | 0.4 |
| Turntable rotation angle (°) | 360 | 360 | 360 |
| Rotary speed of turntable(rpm) | 0～1.0 | 0～1.0 | 0～1.0 |
| Platform rotation angle (°) | 160 | 160 | 160 |
| Number of boom sections(section) | 3 | 3 | 3 |
| Boom luffing angle (°) | －10～＋75 | －12～＋75 | －12～＋75 |
| Maximum hydraulic pressure(MPa) | 21 | 21 | 21 |
| Maximum pressure of traveling system (MPa) | 25 | 25 | 25 |
| Ground clearance (m) | 0.44 | 0.43 | 0.43 |
| Fuel tank capacity (L) | 151 | 151 | 151 |
| Driving speed (stowed)(km/h) | 6.3 | 5.3 | 5.3 |
| Driving speed (lifting status)(km/h) | 1.1 | 1.1 | 1.1 |
| System voltage (V) | 12 | 24 | 24 |
| Rated power of engine (kw/rmp) | 56/2200 | 56/2200 | 60/2200 |
| Drive wheel size | 45219 | 45280 | 45280 |
| Drive steering type | 4×2×2 | 4×2×2 | 4×2×2 |
| Operating Weight (kg) | 13540 | 15500 | 16140 |
