Vertical Mast Aluminum Alloy Aerial Working Platform
The FX collection vertical mast aerial work platform makes many hard and hazardous jobs tons easier. This aerial elevate platform is characterized by way of its compactness, flexibility and convenience. Instead of indoor scaffolding and ladders, a platform can be used to attain the peak you want and remedy your problems. At an equal time, it can additionally keep your value and precious time. It is, in particular, appropriate for non-stop high-altitude operation in large areas such as airport terminals, stations, docks, purchasing malls, stadiums, neighborhood homes and workshops.
Product Features:
● - 345-degree rotary desk rotation
● - Lightweight, effortless to transport and shift, enhance work efficiency
● - 3m horizontal extension to cowl greater working area
● - Touch display for rapid fault analysis and feature set
● - Compact tower rotation radius is smaller than the base extension, even in slender aisles, it can run freely
● - Battery-driven, appropriate for indoor work with high environmental requirements
● - Suitable for indoor construction renovation and restoration of high-altitude facilities/factory amenities preservation and gear set up required in a small house/out-of-doors billboard, ornamental mild installation, etc.
Technical Parameters:
Model | FX-11 | FX-10 | |
Max. working height | 11.20m | 10.00m | |
Max. platform height | 9.20m | 8.00m | |
Maximum horizontal extension | 3.00m | 3.00m | |
Maximum span height | 7.89m | 6.69m | |
Overall machine length | 2.72m | 2.72m | |
Machine width | 1.00m | 1.00m | |
Overall machine height | 1.99m | 1.99m | |
Working platform size | 0.62x0.87m | 0.62x0.87m | |
Wheelbase (m) | 1.22m | 1.22m | |
Minimum Ground Clearance | Gathered | 0.06m | 0.06m |
Raised | 0.019m | 0.019m | |
Safe working load | 200kg | 200kg | |
Maximum number of workers | 2 | 2 | |
Minimum turning radius (inner wheel) | 0.23m | 0.23m | |
Minimum turning radius (outer wheel) | 1.65m | 1.65m | |
Turntable slewing angle | 345° | 345° | |
Small arm swivel angle | +70°/-60° | +70°/-60° | |
Machine travel speed (lifting state) | 0.5km/h | 0.5km/h | |
Machine travel speed(retracted state) | 4.5km/h | 4.5km/h | |
Ascending/descending time | 95/50sec | 84/45sec | |
Maximum climbing capacity | 0.25 | 0.25 | |
Working maximum allowable angle | 2.5° | 3° | |
Tire | 381x127mm | 381x127mm | |
Drive motor | 24V/1.5kw | 24V/1.5kw | |
Lifting motor | 24V/3.0kw | 24V/3.0kw | |
Battery | 24V/240Ah | 24V/240Ah | |
Operating Weight | 2950kg | 2890kg |
| Model | FX-11 | FX-10 | |
| Max. working height | 11.20m | 10.00m | |
| Max. platform height | 9.20m | 8.00m | |
| Maximum horizontal extension | 3.00m | 3.00m | |
| Maximum span height | 7.89m | 6.69m | |
| Overall machine length | 2.72m | 2.72m | |
| Machine width | 1.00m | 1.00m | |
| Overall machine height | 1.99m | 1.99m | |
| Working platform size | 0.62x0.87m | 0.62x0.87m | |
| Wheelbase (m) | 1.22m | 1.22m | |
| Minimum Ground Clearance | Gathered | 0.06m | 0.06m |
| Raised | 0.019m | 0.019m | |
| Safe working load | 200kg | 200kg | |
| Maximum number of workers | 2 | 2 | |
| Minimum turning radius (inner wheel) | 0.23m | 0.23m | |
| Minimum turning radius (outer wheel) | 1.65m | 1.65m | |
| Turntable slewing angle | 345° | 345° | |
| Small arm swivel angle | +70°/-60° | +70°/-60° | |
| Machine travel speed (lifting state) | 0.5km/h | 0.5km/h | |
| Machine travel speed(retracted state) | 4.5km/h | 4.5km/h | |
| Ascending/descending time | 95/50sec | 84/45sec | |
| Maximum climbing capacity | 0.25 | 0.25 | |
| Working maximum allowable angle | 2.5° | 3° | |
| Tire | 381x127mm | 381x127mm | |
| Drive motor | 24V/1.5kw | 24V/1.5kw | |
| Lifting motor | 24V/3.0kw | 24V/3.0kw | |
| Battery | 24V/240Ah | 24V/240Ah | |
| Operating Weight | 2950kg | 2890kg |
