Vertical Mast Type Aerial Working Platform
The FX collection vertical mast aerial work platform makes many challenging and unsafe jobs a good deal easier. This aerial carry platform is characterized by its compactness, flexibility and convenience. Instead of indoor scaffolding and ladders, a platform can be used to attain the top you want and clear up your problems. At an equal time, it can additionally show your value and treasured time. It is particularly appropriate for non-stop high-altitude operation in large areas such as airport terminals, stations, docks, buying malls, stadiums, neighborhood homes and workshops.
Product Features:
● - 345-degree rotary desk rotation
● - Lightweight, convenient to transport and shift, enhance work efficiency
● - 3m horizontal extension to cowl extra working area
● - Touch display for speedy fault prognosis and characteristic setting
● - Compact tower rotation radius is smaller than the base extension, even in slim aisles, it can run freely
● - Battery-driven, appropriate for indoor work with excessive environmental requirements
● - Suitable for indoor construction upkeep and restoration of high-altitude facilities/factory amenities renovation and tools set up required in a small house/out-of-doors billboard, ornamental mild installation, etc.
Technical Parameters:
Model | FX-11 | FX-10 | |
Max. working height | 11.20m | 10.00m | |
Max. platform height | 9.20m | 8.00m | |
Maximum horizontal extension | 3.00m | 3.00m | |
Maximum span height | 7.89m | 6.69m | |
Overall machine length | 2.72m | 2.72m | |
Machine width | 1.00m | 1.00m | |
Overall machine height | 1.99m | 1.99m | |
Working platform size | 0.62x0.87m | 0.62x0.87m | |
Wheelbase (m) | 1.22m | 1.22m | |
Minimum Ground Clearance | Gathered | 0.06m | 0.06m |
Raised | 0.019m | 0.019m | |
Safe working load | 200kg | 200kg | |
Maximum number of workers | 2 | 2 | |
Minimum turning radius (inner wheel) | 0.23m | 0.23m | |
Minimum turning radius (outer wheel) | 1.65m | 1.65m | |
Turntable slewing angle | 345° | 345° | |
Small arm swivel angle | +70°/-60° | +70°/-60° | |
Machine travel speed (lifting state) | 0.5km/h | 0.5km/h | |
Machine travel speed(retracted state) | 4.5km/h | 4.5km/h | |
Ascending/descending time | 95/50sec | 84/45sec | |
Maximum climbing capacity | 0.25 | 0.25 | |
Working maximum allowable angle | 2.5° | 3° | |
Tire | 381x127mm | 381x127mm | |
Drive motor | 24V/1.5kw | 24V/1.5kw | |
Lifting motor | 24V/3.0kw | 24V/3.0kw | |
Battery | 24V/240Ah | 24V/240Ah | |
Operating Weight | 2950kg | 2890kg |
| Model | FX-11 | FX-10 | |
| Max. working height | 11.20m | 10.00m | |
| Max. platform height | 9.20m | 8.00m | |
| Maximum horizontal extension | 3.00m | 3.00m | |
| Maximum span height | 7.89m | 6.69m | |
| Overall machine length | 2.72m | 2.72m | |
| Machine width | 1.00m | 1.00m | |
| Overall machine height | 1.99m | 1.99m | |
| Working platform size | 0.62x0.87m | 0.62x0.87m | |
| Wheelbase (m) | 1.22m | 1.22m | |
| Minimum Ground Clearance | Gathered | 0.06m | 0.06m |
| Raised | 0.019m | 0.019m | |
| Safe working load | 200kg | 200kg | |
| Maximum number of workers | 2 | 2 | |
| Minimum turning radius (inner wheel) | 0.23m | 0.23m | |
| Minimum turning radius (outer wheel) | 1.65m | 1.65m | |
| Turntable slewing angle | 345° | 345° | |
| Small arm swivel angle | +70°/-60° | +70°/-60° | |
| Machine travel speed (lifting state) | 0.5km/h | 0.5km/h | |
| Machine travel speed | 4.5km/h | 4.5km/h | |
| (retracted state) | |||
| Ascending/descending time | 95/50sec | 84/45sec | |
| Maximum climbing capacity | 0.25 | 0.25 | |
| Working maximum allowable angle | 2.5° | 3° | |
| Tire | 381x127mm | 381x127mm | |
| Drive motor | 24V/1.5kw | 24V/1.5kw | |
| Lifting motor | 24V/3.0kw | 24V/3.0kw | |
| Battery | 24V/240Ah | 24V/240Ah | |
| Operating Weight | 2950kg | 2890kg |
